Printek FormsPro 4000se Series, Operator'S Manual

Page: 51 / 127

43
PRINTER CONFIGURATION
Introduction To Setup
The FormsPro 4500se series printers feature simple, easy to use menus for
setting the various operating parameters for the printer. The parameters
available in these menus usually only need to be set one time, either when
the printer is first installed or perhaps when a new form is to be used.
These values are stored in nonvolatile memory, which means that they will
remain set even if the printer is turned off. Following this introduction are
complete, detailed descriptions of each menu item.
Setup Buttons
For your convenience, the
SETUP
button and the other buttons used while
in the Setup mode are labeled in yellow on the control panel. Once in
Setup, these buttons are the
FUNCTION
and
VALUE
buttons. The
SETUP
indicator will flash yellow whenever the printer is in the Setup mode as a
reminder to use the yellow labels. The buttons used for Setup are shown
below.
Control Panel Setup Buttons
The menu system works on a “what you see is what you get” basis. This
means that whatever value is last displayed for an item is the value that will
be saved when Setup mode is exited.