Printek FormsPro 4000se Series, Operator'S Manual

Page: 64 / 127

P R I N T E R C O N F I G U R A T I O N
56
Characters
Characters
Control
Possible Values: Control*, Printable
This item selects whether certain control character symbols will be printed
or be treated as control characters. The effect of this is dependent upon the
Emulation
selected.
Minimum Buffer
Minimum Buffer
No
Possible Values:
No*, Yes
This item selects whether the smallest possible I/O buffer should be used.
Setting this item to
No will allow the printer to make maximum use of the I/O
buffer (see “
Paper Out Fault
” on page 64 for more information on buffer
size). Setting this to
Yes
may decrease performance, but is useful when
the printer is currently printing using the printer with operating systems that
try to keep track of which page. This may also be useful when using serial
I/O with systems that do not respond quickly enough to handshake signals.
Baud Rate
Baud Rate
9600
Possible Values: 110, 150, 300, 600, 1200, 2400, 4800,
9600*
This item selects the baud rate for the serial interface. This must be set to
match the baud rate setting on the host computer.
Data Bits
Data Bits
8
Possible Values: 8*, 7
This item selects the number of data bits in the serial character frame. This
must be set to match the character size setting on the host computer.