Printek FormsPro 4000se Series, Operator'S Manual

Page: 10 / 127

I N T R O D U C T I O N
2
Manual Contents
* Unless specifically noted, all instructions and information herein is
valid for all models in the 4000se series.
•
GETTING STARTED
provides instructions for installation, setting up
the computer interface, installing the ribbon cartridge, loading paper,
and performing a printer self-test.
•
DAILY OPERATION
provides more detailed descriptions of the
features that are used most frequently. These include the “every day”
buttons and indicators on the control panel, selecting or loading new
forms, ejecting forms, changing the ribbon cartridge, aligning print with
preprinted forms, and causes for common error conditions.
•
PRINTER CONFIGURATION
provides detailed information on how
to use Setup to permanently store parameters for each of the ten
forms, parameters for the standard and optional interfaces, and
parameters for other options.
•
SPECIFYING FORMS
provides tips for form construction and layout.
•
MAINTENANCE AND TROUBLESHOOTING
lists more serious
error messages than discussed in the Daily Operation section,
preventive maintenance, and how to obtain service.
•
ADVANCED SETUP FEATURES
provides information on how to set
menu security.
•
USING REMOTE SETUP
describes how to “set up” default
parameters from a host computer.
•
USING THE SETUP MODULE
describes how the optional Setup
Module can be used to copy Setup parameters from one printer to
another.
•
PRINTER RESET CONDITIONS
describes the state of the printer
after power up or reset.