Printek FormsPro 4000se Series, Operator'S Manual

Page: 38 / 127

D A I L Y O P E R A T I O N
30
4. Then press the
LOAD/FORM FEED
button. The tractors will move
to the specified path (if necessary) and position the top of the
selected form at the tear bar.
5. Press the
ONLINE
button to place the printer back into operation.
Ejecting And Tearing Off A Form
When most print jobs complete, they will command the paper to be
positioned at the top of the next form so that the printer is ready for the next
job. This is, however, dependent solely upon how the programmer chose
to write your particular application software. If your software does position
the paper at the top of the next form, the printer will automatically position
the form at the tear bar as shown in the following picture.