Printek FormsPro 4000se Series, Operator'S Manual

Page: 37 / 127

D A I L Y O P E R A T I O N
29
FormsPro 4503se with Forms in All Tractor
Paths
Center Path Positioned for Loading
4. Close the case of the printer by lowering it until the lower front
panel closes. The printer LCD will display
Case Closed
when you do this.
5. Check the LCD display to make sure the correct form setup (0-9)
or the actual name of the form has been selected. If necessary,
press the
UNLOAD/FORM SELECT
button until the correct one is
displayed.
6. Now press the
LOAD/FORM FEED
button to position the top of
the paper at the tear bar.
7. The printer LCD will display “
Load Paper
” when you do this.
After the paper is loaded, the LCD will display the form number
or the actual name of the form if selected, and if a FormsPro
4503se, the path.
8. Paper installation is now complete. Press the
ONLINE
button to
place the printer back on-line.
Changing to a Form Installed in Another Path
1. To unload the currently loaded paper or form, first tear off any
forms that have been printed.
2. Then take the printer offline and press the
UNLOAD/FORM
SELECT
button. This positions the top of the paper in the tractors
in the base of the printer.
3. Press the
UNLOAD/FORM SELECT
button until the desired form
and path are displayed on the LCD.