Printek FormsPro 4000se Series, Operator'S Manual

Page: 105 / 127

97
CONTROL CODE AND
ESCAPE SEQUENCE SUMMARIES
Genicom 3840 and 3410 Emulation
BEL Bell
BS Backspace
CR Carriage Return
CSI Control Sequence Introducer
ESC D Line Feed
ESC E New Line
ESC ESC n Select Software Interface n
ESC H Set Horizontal Tab
ESC J Set Vertical Tab
ESC K Subscript Printing
ESC L Superscript Printing
ESC P <graphics> ESC \ 6 Pin Graphics Mode
ESC [(p1);(p2)<SP>B Oversize Font / Graphic Size Modification
ESC [(p1);(p2)<SP>G Line / Character Spacing
ESC [(p)` Horizontal Position Absolute
ESC [(p)a Horizontal Position Relative
ESC [(p)d Vertical Position Absolute
ESC [(p)e Vertical Position Relative
ESC [(p1);(p2)f Vertical and Horizontal Position Absolute
ESC [(Ps)g Clear Tabs
ESC [(p)h Set Auto CR on LF
ESC [(p)j Horizontal Position Backwards
ESC [(p)k Vertical Position Backwards
ESC [(p)l Reset Auto CR on LF
ESC [(p1);...(pn)m Font and Print Modes
ESC [(p1)p Paper Path
ESC [(p1)q Graphics Density
ESC [(p1);(p2);(p3)r Forms Setup
ESC [(p1);(p2)s Margins Setup
ESC [(p1)t Oversized Font / Barcode Mode
ESC [(p1);(p2);...(p22)u Set Horizontal Tabs at Certain Positions