Printek FormsPro 4000se Series, Operator'S Manual

Page: 68 / 127

P R I N T E R C O N F I G U R A T I O N
60
IP Address Method
IP Address
Auto
Possible Values: Auto*, Static
This item controls how the optional Ethernet interface card receives its
network address. When set to
Auto
, the Ethernet card will receive its
network address from a network DHCP server (typical installation). When
set to Static, the user sets the TCP/IP address, Subnet Mask and TCP/IP
Gateway address as follows:
IP Address
IP Address
192.160.0.27
Possible Values: 000.000.000.000 … 255.255.255.255
To set the TCP/IP address, use the
CURSOR
button to select which digit
group you wish to change, and then use the
UP/DOWN VALUE
button to
change the value. The value will change rapidly if the key is held down.
Subnet Mask
Subnet Mask
255.255.255.0
Possible Values: 000.000.000.000 … 255.255.255.255
To set the Subnet Mask, use the
CURSOR
button to select which digit
group you wish to change, and then use either
VALUE
buttons to change the
value. The value will change rapidly if the key is held down.
Gateway Address
IP Gateway
192.168.0.0
Possible Values: 000.000.000.000 … 255.255.255.255