Printek FormsPro 4000se Series, Operator'S Manual

Page: 106 / 127

C O N T R O L C O D E S A N D E S C A P E S E Q U E N C E S
98
Genicom 3840 and 3410 Emulation (cont.)
ESC [(p1);(p2);...(p12)v
Set Vertical Tabs at Certain Positions
ESC [(p1);(p2)<SP>{ Paper Shear
ESC [(p1);(p2);...(p12)} Set Barcode Parameter
ESC ]6;4;(p3);(p4)ESC\ Straps and Options
ESC c Reset
ETX End of Text
FF Form Feed
HT Horizontal Tab
HTS Set Horizontal Tab Stop
IND Index
LF Line Feed
NEL Next Line
PLD Partial Line Down (Subscript)
PLU Partial Line Up (Superscript)
VT Vertical Tab
VTS Set Vertical Tab Stop
ANSI X3.64 Emulation
BEL Bell
BS Backspace
CR Carriage Return
CSI Control Sequence Introducer
ESC D Line Feed
ESC E New Line
ESC ESC n Select Software Interface n
ESC H Set Horizontal Tab Stop
ESC J Set Vertical Tab Stop
ESC K Partial Line Down
ESC L Partial Line Up
ESC [ n1 ; n2 SP G Set Character and Line Spacing
ESC [ n ` Absolute Horizontal Tab
ESC [ n a Relative Horizontal Tab
ESC [ n d Absolute Vertical Tab
ESC [ n e Relative Vertical Tab
ESC [ g Clear Horizontal Tab Stop
ESC [ 0 g Clear Horizontal Tab Stop
ESC [ 1 g Clear Vertical Tab Stop
ESC [ 2 g Clear All Horizontal Tab Stops
ESC [ 3 g Clear All Horizontal Tab Stops