Printek FormsPro 4000se Series, Operator'S Manual

Page: 73 / 127

P R I N T E R C O N F I G U R A T I O N
65
printing will resume where it left off as described in the next paragraph. The
printer’s ability to complete the reprint successfully depends on whether the
data for the current page is still in the printer’s memory. Refer to the
following Reprint Page Size option for more information regarding how
much data may be retained.
When
Break Page
is selected, the printer will stop printing and go off
line as soon as a paper out or paper jam condition is detected. After a new
box of forms is loaded, printing will resume where it left off. The
Break
Page
setting is appropriate when you know a page is too large to reprint
(exceeds available buffer size, e.g. contains large graphic images). This will
suppress the error message
Cannot Reprint
before printing
continues.
Character to Ignore
Char. To
Ignore
255
Possible Values: 0, … 255*
This allows a single 8-bit character to be discarded as it is received. This is
useful when the host application is sending an unwanted control character,
for example. Values are in decimal, with printable characters displayed to
the left of the decimal value.
To use this feature:
1. Press the either
VALUE
buttons to select the desired character
decimal value. Printable characters will appear to the left of the
number.
2. Press either
FUNCTION
button to display Ignore Character
On/Off
, then either
VALUE
buttons to turn the feature On or
Off.
This feature should not be turned on unless needed.
Top of Barcode
Top of Barcode
Off
Possible Values
: On, Off*