Printek FormsPro 4000se Series, Operator'S Manual

Page: 39 / 127

D A I L Y O P E R A T I O N
31
Bottom of form at tear bar
If your form is positioned as shown, you may skip the next section on
positioning and proceed with “Tearing off a Form” on the next page.
Positioning the Form for Tear Off
1. If your print job has completed and the form is not positioned as
shown above, take the printer off line by pressing the
ONLINE
button.
2. Press the
FORM FEED
button. This will automatically position the
form at the tear bar and you may tear off the form as described next.
Tearing off a Form
1. Make sure the printer is off line by pressing the
ONLINE
button if
necessary. This will prevent the printer from pulling the paper down
to start printing the next job while you are tearing off this one.
2. Pull the paper toward the front of the printer and toward one side of
the printer as shown.