Printek FormsPro 4000se Series, Operator'S Manual

Page: 20 / 127

G E T T I N G S T A R T E D
12
3. Place the right hand end of the ribbon on the support bracket while
you align the plastic tabs with the slots in the bracket as shown
below.
Installing the Ribbon Cartridge
4. Align and lower the left end of the ribbon onto the left support
bracket until it snaps into place, while guiding the ribbon fabric
between the nose of the print head and the ribbon guide pins.
Continue to lower the cartridge until the tab on the left end of the
cartridge snaps into place.