Printek FormsPro 4000se Series, Operator'S Manual

Page: 28 / 127

D A I L Y O P E R A T I O N
20
Control Panel Features
This section assumes that your printer has already been installed according
to the information in “
Installation and Interface Setup
”, and describes the
daily operation of the FormsPro 4000se series printers. In particular, using
the control panel, changing paper or forms, and changing the ribbon
cartridge are discussed.
Control Panel
The FormsPro 4000se series printers feature an intuitive, easy-to-use
control panel that provides immediate access to the controls required by
most operators. Individual indicators are available which provide a quick
indication of printer status, as well as a two line by sixteen-character
display, which provides even more status information.
Many more features, including form and interface parameters, are available
through the
SETUP
mode. All features, which are modified during setup,
are stored in nonvolatile memory and are used each time the printer is
turned on or reset. For more information, refer to the appendix on
“
PRINTER RESET CONDITIONS
”.
The printer's control panel consists of six pushbutton switches, four LED
indicators, and a two line by 16-character LCD display as shown above.
The pushbutton switches (or buttons), the LCD display, and the LED
indicators provide you with the following controls and status information: