Primera Impressa 2, User Manual

Page: 84 / 104

Section 8: Maintenance 79
Digital Label and Decal Press 2 UserÕs Manual
J. CLEANING THE PINCH ROLLERS
Two sets of Pinch Rollers can be found inside the unit. The first set is located within
the unitÕs cutter. The second set is located next to the printerÕs Platen Roller. These
Pinch Rollers serve to hold print media securely so it can be accurately printed and
cut.
If using the #200-Series (dye-sublimation) or #300-Series (resin) print supplies, you
should not need to clean these rollers. If using the #100-Series (wax/resin) print
supplies, you should clean these rollers only if you notice faint streaks of color
running along each outside edge of the printed page. These streaks are caused by
the gradual transfer of the wax/resin inks from the printed page to the Pinch
Rollers. Refer to the following steps to clean these rollers.
NOTE: If you are using the #100-Series supplies and wish to avoid having to clean the Pinch
Rollers, simply leave a 1.25Ó (31.8mm) margin along each outside edge of the sheet. This
will assure that the wax/resin inks will not come into contact with these rollers.
1. Open the printerÕs Top Cover by pressing the Cover Release Button.
2. Remove the Ribbon Cartridge from the printer.
3. Open the Cutter Door by pulling down on the doorÕs handle.
4. Locate the two, small gray Pinch Rollers just inside the cutter.
5. Use a Cleaning Pad from the Printer Cleaning Kit or a soft, lint-free cloth
slightly moistened with isopropyl alcohol to thoroughly wipe the rollers clean.
While wiping, manually rotate the rollers with your fingertips.
6. After the rollers are clean and completely dry , close the Cutter Door.
Pinch Rollers
DLDP2.qxd 3/29/99 9:56 AM Page 79