Primera Impressa 2, User Manual

Page: 53 / 104

48 Section 6: Installing and Setting Up the Printer Driver Software for Windows 95/98
Digital Label and Decal Press 2 UserÕs Manual
Calibrate
This option allows you to recalibrate your printerÕs ribbon sensor if the need
should ever arise. For more information on the printerÕs ribbon sensor and on the
calibration process, please refer to the end of Section 9. In most instances, this
calibration procedure should not be necessary.
The Calibrate option also allows you to send a simple self test print to the printer
by clicking on the
TEST button. The appropriate self test will automatically print
according to the Ribbon Type option you have selected in the printer driver setup.
Be sure the appropriate print supplies are installed for the selected Ribbon Type.
This self test procedure can be helpful in assuring that your computer is effectively
communicating with the digital press and that it is functioning properly. If you
would like to bypass your computer and print a self test directly from the digital
press, see the self test procedure described in Section 5-B.
To find out the firmware version currently installed in the unit, click on the
VERSION button. Periodically, new firmware versions are released which may
enhance the operation of the digital press. Use this option to determine whether or
not the unit is in need of an update.
After your selections have been made, select the OK button to return to the
Properties window. Select OK again to return to the Printers window. Exit this
window and youÕre ready to go on to Section 7. All printer driver options you
selected will stay the same until you change them.
DLDP2.qxd 3/29/99 9:56 AM Page 48