Primera Impressa 2, User Manual

Page: 62 / 104

Section 7: Installing and Using the PressPrint Software for Windows 95/98 57
Digital Label and Decal Press 2 UserÕs Manual
4. Once all appropriate printer settings have been chosen, select OK to close the
setup window. Select OK from the Printing window to send your print job.
Before the digital press actually starts printing, the print job must be processed or
rasterized. This will take anywhere from several seconds to several minutes
depending on the complexity of your image and the speed of your computer.
During this time, your computer will be tied up. Once the print job finished
rasterizing, your computer will be released and you will hear the unit begin to feed
the first sheet of print media.
The digital press will simultaneously print and cut as many sheets of output as you
originally specified. While printing, you may wish to bring the 32-Bit Spooler to the
foreground in order to monitor the status of the print job. If you experience an error
during operation, you can use the 32-Bit Print Spooler to pause the print job while
you clear any recoverable errors such as an initial print media or ribbon jam. Once
the error is cleared, select
Resume in the spooler to resume printing. After a minute
or two, the digital press will once again begin printing your print job.
If you need to adjust the cut pressure during the print job, use the Cutting Pressure
slide on the front of the unit. See Section 3-D for information on when and how to
adjust the Cutting Pressure slide. For more information on dealing with possible
print errors, please refer to Section 9. For important hints on efficiently working
with the PressPrint software, please refer to Part F of this section.
Digital Label Press 2 Setup
DLDP2.qxd 3/29/99 9:56 AM Page 57