Primera Impressa 2, User Manual

Page: 75 / 104

70 Section 8: Maintenance
Digital Label and Decal Press 2 UserÕs Manual
B. CLEANING THE PRINTHEAD
This procedure is performed if you notice a streak running the length of the page
where ink was not transferred. This procedure should also be performed
approximately every 100 prints in order to maintain consistent print quality.
1. Turn the printer power OFF.
2. Open the printerÕs Top Cover by pressing the Cover Release Button.
3. Remove the Ribbon Cartridge from the printer.
4. Using a Printhead Cleaning Pen from the Printer Cleaning Kit or a soft, lint-free
cloth
slightly moistened with isopropyl alcohol, firmly wipe back and forth
across the surface of the Printhead. If using a cloth, be extremely careful not to
use too much alcohol. It must not be allowed to drip into the printer!
5. Allow the Printhead to thoroughly dry before re-installing the Ribbon
Cartridge.
6. Re-install the Ribbon Cartridge, and shut the cover. If a streak persists, Contact
Technical Support for further assistance.
IMPORTANT! Never use a sharp tool or a metal object of any kind to clean the Printhead. You
will damage the Printhead!
Printhead
Printhead
Printhead Cover
Ribbon Guard
DLDP2.qxd 3/29/99 9:56 AM Page 70