Precisa 300 SCS series, Service Manual

Page: 138 / 222

PAG OERLIKON AG
SERIES-300 S / SCS / SIP
MAIN BOARD 300-7218-010
HAUPTPRINT 300-7218-010
External Switch
S3
EPROM
RAM
Calibration locked
External Tare
External On / Off
External Mode
Main Board Label
EPROM Label
On
Off
Standard Settings
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
Switch 1 On --> IEC625 / IEEE488
Off --> disactivated
Switch 2 On --> USA date
Off --> Europe date
Switch 3 On --> Zero-check (shows ERROR 8)
Off --> disactivated
Switch 4 On --> shows not '--OFF-- Power' during start-up
Off --> shows '--OFF-- Power' during start-up
Switch 5 On --> Real Time Clock
Off --> disactivated
Switch 6 On --> with Internal Calibration
Off --> disactivated
Switch 7 On --> -
Off --> -
Switch 8 On --> Weighing Mode
Off --> Service Mode
DIL-Switch Setting
Software no.
series 300 S = K3x
series 300 SCS = K3x
K3x
"Software no."
EPROM-Labeling
For the function of a PRECISA balance it is absolutely essential that the software (EPROM) is
corresponding with the main board. For this reason the code on the label of the EPROM (the first three
figures) has to be the same as the one marked on the label of the main board.
Example:
"Board no."
K3x
C 01.06