SERIES-300 S / SCS / SIP
PAG OERLIKON AG
CALIBRATION INSTRUCTIONS
D 04.05
- The calibration cycle is started by pressing the TARA "T" key
The calibration of the internal reference weight is starting
- The continuous disply signal is completed on the next page
Shows the weight on the weighing pan
5. The weight can now be taken of the weighing pan again
3. As soon as this signal appears on the display, the "T" key can be
released
Display blinks (zero measuring)
The weighing pan must be empty
Display blinks (waits for weight)
4. Put the weight shown in the middle of the weighing pan if possible
Summary of Contents for 300 SCS series
