PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev.C 03/12
Page 84
CHANGING SOLID TIRES
NOTE: The procedures which follow apply to
SOLID TIRES ONLY.
Front Tire
1. Remove the tire from the vehicle by removing the
five inner lug nuts.
2. Remove the ten hex head bolts and nuts.
3. Press the tire from the rim.
4. Press the large rim half into the new tire.
5. Mount the small rim half and secure with hex head
bolts.
6. Reinstall the tire on the machine
Rear Tire
The rear tire is a special traction rubber compound press-on
type tire.
MISCELLANEOUS ADJUSTMENTS
Anti-Static Chain Adjustment
Each machine is equipped with an anti-static chain bolted
to the back wall of the broom chamber. This should remain
in contact with the floor at all times. Inspect the chain every
200 operating hours. Replace if at least one link does not
drag the surface of the floor.
Latch and Hinge Maintenance
Latches and hinges should be inspected after every 500
hours of use. Retighten and oil if necessary.
Cables
Inspect all cables for wear every 500 hours.
PREVENTATIVE MAINTENANCE
