PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev. C 03/12
Page 4
This is the User Manual for the PowerBoss Commander T Series Sweeper Scrubber.
This manual covers all Standard Commander T Series machine variations beginning May 2009.
We believe this machine will provide excellent service for many years.
However, the best results will be obtained if:
• The machine is operated with reasonable care.
• The machine is maintained regularly per the maintenance schedule provided in the User Manual.
• The machine is maintained with PowerBoss Inc. supplied or equivalent parts.
All right side and left side references to the machine (except for engine) are determined by facing the direction of forward
travel. The front of the engine or engine fan faces the rear of the machine. Some hardware considered to be common or
locally available has been omitted from the parts section to make this manual clear. Be sure to use equivalent hardware
when replacement becomes necessary.
The Model and Serial Number of your machine is shown on the I.D. name plate. This information is needed when
contacting Technical Support or when ordering parts. The I.D. plate is mounted on the console of the machine left of the
operator and adjacent the main broom adjustment access door.
Parts may be ordered by phone,fax or e-mail from any PowerBoss parts and service center. Before ordering parts or
supplies, be sure to have your machine model number and serial number handy. For your convenience Fill out the data
block below for future reference.
PREFACE
