PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev.C 03/12
Page 34
MACHINE OPERATION
DEBRIS HOPPER DUMP CONTROLS
HIGH DUMP
The two far left levers on the front control panel are used to
raise the hopper to any height up to 60” (1.52 m) and dump
it.
WARNING
Never get beneath a raised hopper without the
safety arm in place.
Lever 1
Pull back on the lever 1 to raises the hopper, and release
the lever when you have reached the proper height. Push
forward to lower the hopper.
NOTE: The engine must be running to raise the
hopper, but does not have to be running to
lower the hopper.
Lever 2
Pull back on Lever 2 to rotate and dump the hopper. Push
forward to return the hopper to it original position.
NOTE: The engine must be running to dump and
return the hopper. The hopper must be
raised to rotate the hopper.
HOPPER UNLOCK BUTTON
If equipped the unlock hopper button must be pressed to
raise, lower, dump, and return the hopper. The commander
Europe model machines are equipped with a two handed
hopper operation.
ROTARY TRASH RELOCATOR (RTR™)
Rotary Trash Relocator (RTR™) is a standard feature on
high-dump models. Its purpose is to increase the holding
capacity of the debris hopper to make dumping the hopper
necessary less frequently.
HOPPER FILTER SHAKER BUTTON
This button is used to activate the filter shakers prior to
dumping or as needed during sweeping operation. It is
located to the left hand side of the instrument panel.
FIRE IN THE HOPPER INDICATOR (OPTIONAL)
The fire in the hopper indicator illuminates when a fire is
detected in the hopper.
