PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev.C 03/12
Page 82
Vacuum Gasket Mount Adjustment
1. With the hopper in the normal position, observe
contact between the back of the hopper and gasket.
If complete seal is not maintained, raise the high
dump hopper.
WARNING
Do not rely upon the hydraulic cylinders to keep
the hopper raised for maintenance. Always
engage the safety arm before servicing the
hopper.
2. Loosen the mounting bolts in the gasket mount.
Move the assembly toward the hopper. Tighten the
bolts. Test and repeat if necessary.
PARKING BRAKE
Normal adjustment of the parking brake can be
accomplished from the operator compartment. Locate the
knurled handle on the parking brake lever. Turn the handle
clockwise to increase brake tension.
NOTE: Two or three turns is usually adequate. DO
NOT OVERTIGHTEN.
If this adjustment becomes ineffective, it will be necessary to
adjust the cable length.
PREVENTATIVE MAINTENANCE
