Commander T Series PB# 4100032
Rev.C 03/12
PowerBoss, Inc. Copyright 2011
Page 43
FILLING THE SOLUTION TANK
CAUTION
Never use detergents or cleaners that are
flammable or combustible. Always wear safety
glasses and protective clothing when using
chemicals of any kind.
It is recommended to use PowerBoss chemicals
which are specially formulated for use in power
scrubbers.
1. Park the machine on a level area and lock the
parking brake.
2. Make sure the solution delivery valve is closed via
the solution lever.
3. Open the top door of the machine and remove the
plug @ the Auto fill Assembly. Connect a garden
hose to the AutoFill Assembly. Turn on faucet for
clean water solution. The water will shut off when the
proper level is achieved. Disconnect garden hose
replace the plug @ auto fill connector and close top
door.
MACHINE OPERATION
SOLUTION TANK
AUTO FILL
ASSEMBLY
SOLUTION TANK
6” FILL CAP
or
Unscrew the smallest (6 inch) cap located on the top
of the solution tank. Fill the tank with cleaning water
solution. When the tank is full, close the door and
replace the cap.
