Commander T Series PB# 4100032
Rev.C 03/12
PowerBoss, Inc. Copyright 2011
Page 73
Scrubhead Adjustment
1. Park unit on a level floor and lower the scrubhead to
the full down position.
2. Open both scrub doors and remove the two hitch
pins from the right and left side squeegee blade.
Remove the right and left side squeegee blades.
3. Remove the bolts, washers and lock nuts holding
both lift arms to the scrub deck.
PREVENTATIVE MAINTENANCE
4. Loosen the jam nut securing the rod end to the lift
arms.
5. Adjust the rod end so that 1/2” (10 threads) of the
rod end extends from the lock nut on the lift arms.
NOTE: The 1/2”(10 threads) is a reference point to
start from.
LOWER SCRUB
DECK UNTIL FLAT
ON THE FLOOR
SCREW HOLDING
LIFT ARM TO
SCRUB DECK
SCRUB DECK
LIFT ARM
LOCK NUT
ROD END
1/2” (10 THREADS)
