POLARA iDS2 Manual Download Page 8

Page: 8 / 107

iNS/iDS 2-Wire System Manual

350-077

Rev. D - 1/20/2021

Page 8 of 107

Push button Operating Force Range: 1 to 3 lbs.

Maximum Audio Output Level: 100 dBA @ 1 meter

Dimensions W x D x H: 129 x 69 x 355 (mm - Reference Only)

Weight: 4.4 lbs.

Designed for Outdoor Use, Wet Location and Overvoltage Category: NEMA 250 4X

2.2

iCCU-S2 Intelligent Central Control Unit for Shelf

2.2.1

Technical Specifications

Input Voltage / Current: 110-220V, 50/60Hz, 3A

PBS Output: 24 VDC / 3.17A continuous, 3.75A surge

Ped Walk / Don’t Walk Inputs: Optically isolated 80 – 150 Volts AC/DC, 5mA max.

Ped Outputs: Optically Isolated 36 Volts AC/DC peak, 300mA Solid State Fused Contact Closure

General Purpose Inputs: 10

– 36 Volts AC/DC peak, 10mA max, Optically Isolated

EV Inputs: Active when pulled low (< 5 V to Logic Ground)

Communication: SDLC port, Ethernet, Wi-Fi (IEEE 802.11b/g/n)

*Operating Temperature Range: -34°C to +74°C, 95% Relative Humidity

*Storage Temperature Range: -40°C to + 85°C

Environmental Conditions:

• Mains supply voltage fluctuations up to ±10% of the nominal voltage

• Overvoltage Category ll

• Pollution Degree 2

Mounted inside all-weather enclosure, provided by customer

Dimensions W x D x H: 81 x 224 x 161

” (mm - Reference Only)

Weight: 3.28 lbs.

*The LCD temperature range is limited to -20°C to +70°C operational and -30°C to +80°C storage.

Summary of Contents for iDS2












































































































Search results

Summary of Contents for iDS2

Reviews:

Related manuals for iDS2

Brands by name

Popular brands

POLARA iDS2, Manual

Search results

Summary of Contents for iDS2

Reviews:

Related manuals for iDS2

Brands by name

Popular brands