iNS/iDS 2-Wire System Manual
350-077
Rev. D - 1/20/2021
Page 32 of 107
5.4.3
Advanced iCCU-X2 Settings
–
Channel Assignment
Associate phases with the SDLC PED channels that should be monitored. Refer to the Traffic Controller
’s user manual
and configuration to determine which SDLC channels correspond to which Ped phases.
To associate an SDLC PED channel with a phase, choose the channel from the selector on the bottom-left of the screen
and choose a phase from the selector from the bottom-right of the screen. Then click Assign. The new phase assignments
will be highlighted in green in the top area of the screen, indicating a change has been made but not saved. Continue to
assign the appropriate phases to all channels in use. When finished, select Save in the upper-right area of the screen.
Proceed to Ped Call Connection Setup on the next page.