POLARA iDS2 Manual Download Page 99 | Manualshive

Page: 99 / 107

background image

iNS/iDS 2-Wire System Manual

350-077

Rev. D - 1/20/2021

Page 99 of 107

iCCU-X2 is not detected for an extended length of time, the PBS will switch to the other PLC frequency band and restart
itself. Once the iCCU-X2 is detected and the PBS makes a logical connection over PLC, it will exit this sub-state. View the
Advanced Communications Settings section for additional help in diagnosing PLC connection issues.

16.2.3

No Pedestrian Interval Detected

Pilot LED will blink in a 4-flash pattern.

This indicates that the PBS is not receiving a valid Ped Interval even though it has PLC communication with the iCCU-X2.
This will happen when the iNS2 is not assigned to a phase or if it is assigned to a phase and it is receiving an Off Interval
from the iCCU-X2.

16.2.4

Power-On-Self-Test Failed

Pilot LED will blink in a 5-flash pattern.

This indicates the unit has failed the startup self-test routine. This will happen right after startup and the unit will stay in
this state indefinitely. Only a power cycle will recover the unit. Usually this is caused by a faulty unit and it will return to this
state after a power cycle. The health log should indicate what peripheral failed at startup.

16.2.5

Loss of iCCU-X2 Connection

Pilot LED will blink in a rapid flash pattern.

If the unit is fully operational and in the Traffic state or has an iCCU-X2 connection and is waiting for interval information
or phase setup (4-flash mode) and the PLC connection is lost, then the unit will start flashing the Pilot LED rapidly.

During normal operations the iNS2 will receive PLC data from the iCCU-X2. When the iNS2 stops detecting PLC data
from the iCCU-X2 for 4 seconds it will enter this condition. Once PLC connection is reestablished with the iCCU-X2, then
the unit will return to the state it previously was in before the connection loss occurred.

16.3

Pilot LED Double-Flash

Pilot LED will perform 2 quick blinks, 3 times in row.

The Pilot LED will perform the double-flash as an informational indication of which unit is being operated. When a BLE
connection is established with a unit, this double-flash will occur. Also, the user can cause the LED to double-flash by
pressing the Flash LED button in the Polara FS App in the PBS Status screen or in the Phase Setup screen.

«
...
97
98
99
100
101
...
»

Summary of Contents for iDS2












































































































Reviews:

No comments

Related manuals for iDS2

Brand: IBM Pages: 72

ElectraElite IPK

Brand: NEC Pages: 20

Brand: VCON Pages: 66

Brand: JBL Pages: 24

Brand: Magnavox Pages: 23

Brand: Mandik Pages: 34

Brand: Samcen Pages: 44

Brand: Hall Research Technologies Pages: 47

BeoSound 3000 2671

Brand: Bang & Olufsen Pages: 68

Brand: 2VV Pages: 29

Brand: Start Shaphon Pages: 66

Brand: SmartAccess Pages: 4

Bell'O Digital BDSW-1650-BLK

Brand: Twin-Star International Pages: 20

Brand: EMX Industries, Inc. Pages: 19

ClickShare CX-20 Gen2

Brand: Barco Pages: 66

Brand: Balboa Water Group Pages: 20

Brand: Emerson Pages: 16

Brand: Emerson Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands