iNS/iDS 2-Wire System Manual
350-077
Rev. D - 1/20/2021
Page 86 of 107
12.5
Quiet Time
The details of the
feature’s operation is such that if the current time of day falls between the selected start and end time of
the Quiet Time period, then all Minimum and Maximum volume settings will be reduced by the specified reduction amount.
Note:
The “Minimum” volume setting can be reduced down to 0%, but the “Maximum” volume setting will only be reduced
down to 25%. This follows what is settable in the configuration parameters or settings screen.
The table below shows what the effective volume settings would be with the Quiet Time set to reduce the volume by 30%.
With the values set as shown in the screenshots, between the hours of 9:00am and 7:59pm, the volume will be as set
configured in settings (shown in the “set value” column). At 8:00pm to 8:59am the following morning, the volumes will be
reduced as shown in the “reduced value” column.
Setting Name
Set Value
Reduced
Value
Locate Volume Minimum
0%
0%
Locate Volume Maximum
50%
25%
Information Message Minimum
65%
35%
Information Message Maximum
100%
70%
Std Walk Minimum
30%
0%
Std Walk Maximum
60%
30%
Ext Walk Minimum
60%
30%
Ext Walk Maximum
80%
50%
