POLARA iDS2 Manual Download Page 24 | Manualshive

Page: 24 / 107

background image

iNS/iDS 2-Wire System Manual

350-077

Rev. D - 1/20/2021

Page 24 of 107

Re-install the lower cover.

For programming and configuration of the iNS2 System, launch the Polara Field Service App and complete

of

this User Manual.

If using an Android device, please refer to the “iN2 Polara FS Android Application Manual”

when using the FS App.

The iNS2 PBS is now ready to use. If you wish to customize more available settings, please review

IMPORTANT: The iNS2 System (iNS2 PBS and iCCU-X2) operate with compatible firmware sets. To
ensure proper operation of the complete system and to have the latest features and security
enhancements, all equipment should be upgraded upon installation with the latest released firmware.
The latest firmware may be obtained through our iOS or PC Applications with an active internet
connection. Please refer to

for the update procedure using the iOS App, or

for the

update procedure using the PC App.

3.6.1

Connecting an External Button

The iNS2 PBS supports connection of an external button such as the Polara Bulldog BDSP-014. Pressing the external
button is equivalent to pressing the iNS2 button, but without the associated push confirmation sound. The button wire pair
should connect to the small terminal block with one wire to the GND terminal and the other wire to the PWR terminal.
Polarity is not important. More than one external button is acceptable.

4.

Technical Support Contact

Polara @ 903-366-0300 EXT 4 or 888-340-4872

Polara Enterprises, LLC
1497 CR 2178

Greenville, TX 75402

The latest version of this manual is available in PDF format at

5.

Using the Polara Field Service App for iOS to Change iCCU-X2
Settings

All of the available setup and maintenance procedures may be performed using a compatible iOS device. Your device
must have iOS version 9.0 or higher.

The Polara Field Service App is available free in the App Store. Search for Polara Field. Locate the app and tap the
download arrow to install. For more information on installation, including how-to videos, tech briefs, and more, please visit
Polara’s web site -

The App supports Bluetooth connection to any PBS, and Wi-Fi connection to the iCCU-X2. All PBS and iCCU-X2
configuration options are accessible using either connection. File uploads containing firmware or audio must be performed
by connecting directly to the target unit. Skip to section 6 for instructions on connecting via Bluetooth.

Upon first run of the Polara FS app, you will be prompted with two iOS dialogs for granting access. The Polara FS app
needs access to iOS Location Services in order to gain access to the WiFi network information allowing the app to detect
and connect to iCCU units. The app also needs access to Bluetooth in order to communicate with iNavigator units. Tap
the appropriate action to allow the app to access these resources.

«
...
22
23
24
25
26
...
»

Summary of Contents for iDS2












































































































Reviews:

No comments

Related manuals for iDS2

Brand: Beyerdynamic Pages: 112

Brand: Teac Pages: 60

Brand: Fagor Pages: 68

Brand: JBL Pages: 11

Brand: W. A. Production Pages: 5

Brand: Fender Pages: 51

Brand: Ferguson Pages: 13

Brand: Audiovox Pages: 35

Brand: H2flow Pages: 16

AUDEMAT FM PROBE

Brand: Worldcast Systems Pages: 80

Happy Call Series

Brand: lee handels Pages: 13

Brand: LAIA Pages: 9

Brand: Inovalley Pages: 12

Passport Event Series 2

Brand: Fender Pages: 44

Alltech 3300 ELSD

Brand: DataApex Pages: 20

Brand: Craig Pages: 2

NOVA Powerplus VP3466

Brand: Vicon Pages: 101

Brand: Motorola Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands