POLARA iDS2 Manual Download Page 60 | Manualshive

Page: 60 / 107

background image

iNS/iDS 2-Wire System Manual

350-077

Rev. D - 1/20/2021

Page 60 of 107

10.

Using Polara Field Service App for PC to Change iCCU-X2

Settings

Most of the available setup and maintenance procedures may be performed using a PC or Laptop with Wi-Fi capability.
Note: To communicate with the iNS2 PBS via Bluetooth, the Polara iN-DGL (BLE Dongle) is required.

The App supports Bluetooth connection to any PBS through the iN-DGL (BLE Dongle), and Wi-Fi connection to the
iCCU-X2. All PBS and iCCU-X2 configuration options are accessible using either connection. File uploads containing
firmware or audio must be performed by connecting directly to the target unit. Skip to section 12 for instructions on
connecting via Bluetooth.

10.1

Download Polara Field Service App for PC (Intelligent Config) Application

The Intelligent Config application is available for download from www.polara.com.

10.2

iN-DGL (BLE Dongle)

The Intelligent Config application requires the use of the Polara iN-DGL (BLE Dongle) to communicate with the Polara
iNS2 PBS.

10.3

Application Installation

Your computer must be running Windows 7, 8, 8.1, or Windows 10. Also, you must have .NET Framework 4.0 or higher
installed in order for the application to run. The installation process will include this step if necessary, however your
computer must be connected to the internet to access those installation files. A driver program for the BLE dongle will be
installed as needed. Locate the downloaded installation file, extract the IntelligentConfigSetupVxxxx.exe file, if necessary,
then double-click to begin. Follow the on-screen instructions to complete the installation.

10.4

Wi-Fi Connection

While a Bluetooth connection will allow complete system configuration access, a Wi-Fi connection is also available.
Before connection is possible, Wi-Fi must be enabled on the iCCU-X2. This is done by pressing the SELECT button on
the iCCU-X2 front panel while the main start-up screen is visible. The display should confirm that Wi-Fi is enabled.

«
...
58
59
60
61
62
...
»

Summary of Contents for iDS2












































































































Reviews:

No comments

Related manuals for iDS2

FUSION Apollo MS-WB670

Brand: Garmin Pages: 44

DuplicAir Intelligent Control Blue

Brand: Jydepejsen Pages: 52

Brand: Japan Radio Co. Pages: 101

Aeware Advanced in.k600

Brand: Gecko Pages: 45

Brand: MB QUART Pages: 12

SENTEX Infinity B Series

Brand: Chamberlain Pages: 35

Brand: Boss Audio Systems Pages: 36

AUDIO SYSTEM CONTROLLER SC-1

Brand: Wisdom Pages: 52

Brand: Samsung Pages: 42

3-293-639-11(1)

Brand: Sony Pages: 36

3-287-077-14(2)

Brand: Sony Pages: 48

3-097-196-14(1)

Brand: Sony Pages: 243

Brand: Rutenbeck Pages: 8

Brand: Prolon Pages: 10

Brand: Omron Microscan Pages: 10

Brand: HomeScenario Pages: 11

Brand: FUTABA Pages: 20

nanoBonder LITE

Brand: Fusion Broadband Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands