iNS/iDS 2-Wire System Manual
350-077
Rev. D - 1/20/2021
Page 84 of 107
12.4
Settings
This is the main configuration page where the operating characteristics such as volume levels and sounds may be
selected and uploaded. Settings may be saved to a file for later retrieval to write to multiple PBS units. When this page is
opened, the settings in the PBS are not loaded automatically. Click the Read button to l
oad the PBS’ settings. Make any
changes necessary and click the Write button to write the settings to the connected PBS.
Options for selecting sounds have a button with a speaker symbol. To listen to sounds, click the speaker icon next to the
sound you wish to hear. For safety, the unit will need to go into Maintenance Mode and the LED will perform a 3-flash
pattern.
Press Yes on the confirmation dialog box to enable Maintenance Mode. In this mode, the unit’s main button will
not operate or respond to interval changes so a pedestrian cannot use it. This will only be done on the iNS2 unit you are
directly connected to, so a remote
If you tap on the link for “View All iCCU Information” you will be presented with a dialog
which includes all factory and user-settable settings. This information is also prepended to the health log when exported to
file. button cannot be made to play a walk sound and confuse a pedestrian.
During normal operation, you will see the button:
And when the unit is in Maintenance mode, you will see the button:
Click the button to toggle between modes. When you exit the Settings page, the unit will automatically return to Run
mode.
