Planmeca Sovereign Classic, User Manual

Page: 38 / 298

8.9 Water and air quick-connectors
The water and air quick-connectors are located on the backside of the pylon.
1. Water quick-connector
2. Air quick-connector
A tray can be placed above the water and air quick-connectors. The tray is
attached to the mounting arm with a magnetic connector and can easily be
attached and detached. You can attach the tray to the mounting arm either
from the long end or the short end, and you can freely choose the point of
attachment. Further, you can rotate the tray 180° to the desired position.
The maximum weight limit on the tray is 2 kilograms (4.4 lbs).
On the tray you can place, for example, a table-top scaler, microetcher or
surgical knife.
For information on how to use the quick-connectors, see section "Water and
air quick-connectors" on page 135.
8.10 Planmeca Romexis connection
The dental unit must be connected to Planmeca Romexis software when you
want to use Planmeca Romexis Clinic Management, the intraoral camera,
the touchpad functionality, or sign in with a PlanID card.
Planmeca Romexis Clinic Management software allows time stamped
recording and real-time monitoring and control of most dental unit activities.
The features and gathered data can be used for remote assistance, service
and maintenance support, as well as preventive maintenance planning.
The Romexis symbol on the dental unit’s control panel indicates the state of
the connection.
8 Planmeca Sovereign Classic dental unit
28 Planmeca Sovereign Classic User's manual