Planmeca Sovereign Classic, User Manual

Page: 225 / 298

If your dental unit has been locked because the maintenance protocol
has not been followed, unselect this action to unlock the dental unit.
NOTE
The primary and recommended measure for unlocking the dental unit is
to run the outstanding or uncompleted flushing or cleaning cycle.
29.4 Starting cleaning programs remotely from Planmeca Romexis
NOTE
This feature requires Planmeca Romexis software version 4.5 and Planmeca
Romexis Clinic Management.
If your dental unit is connected to Planmeca Romexis, it is possible to
schedule the cleaning programs so that they start at a time convenient for
you, for example, when you are not in the clinic. To schedule the remote
start-up of cleaning programs for your dental unit or group of dental units,
contact your Planmeca dealer.
When a remote start-up of cleaning programs has been scheduled for your
dental unit, you must do the following before the scheduled cleaning
program starts:
•
Sign out from the dental unit.
• Remove the cup from the cup holder.
• Ensure that the tray is not under the cup fill tube.
• Place all water consuming instruments firmly in the openings in the
flushing holder.
• Place the suction tubes firmly in the openings in the suction tube
cleaning holder.
CAUTION
To avoid water leaks, ensure that all instruments and suction tubes are
firmly in the holders.
When the cleaning program is started remotely by Planmeca Romexis, a
pop-up window is displayed on the control panel. The pop-up window has a
counter indicating the delay before the cleaning program actually starts.
During the delay you can either cancel the cleaning program or start it
immediately. If the cleaning program is cancelled, there is no retry and the
scheduled cleaning will not be performed.
29 Flushing and cleaning programs
User's manual Planmeca Sovereign Classic 215