Planmeca Sovereign Classic, User Manual

Page: 175 / 298

24.5.4 LM scaler
CAUTION
Keep the patient's lips, cheeks and tongue out of the way of the activated
scaler tip, as contact may cause burns.
The LM scaler has three modes:
•
low (0 - 40)
• medium (0 - 70)
• full (0 - 100).
Start with the low mode and, if needed, gradually change to medium and full
mode.
When the scaler is the active instrument, the scaler mode can be changed
by pressing Power.
24.5.5 EMS No Pain scaler
The EMS No Pain scaler has three modes:
•
endodontics; power range 1 - 50
• scaling; power range 1 - 100
• restoration; power range 50 - 100.
The power range for all three modes is displayed as 1 - 100 (for example, in
the restoration mode, power range 50 is displayed as 1).
When the scaler is the active instrument, the scaler mode can be changed
by pressing Power.
24.5.6 Instrument light
When the instrument light is on, the indicator light on the control panel button
is green.
Control panel: Press Instrument light to switch the instrument light on/off.
Foot control: The instrument light can be programmed to be switched on/off
from the foot control. For programming instructions, see section "Foot control
functions" on page 200.
The instrument light intensity can be programmed, see section "Instrument
light" on page 187.
24.6 Planmeca Lumion Plus polymerisation light
CAUTION
The polymerisation light generates optical radiation and proper safety
measures should be taken when using the instrument. For detailed
information, please refer to OEM documentation.
CAUTION
Do not use the polymerisation light on patients with cardiac pacemakers.
The polymerisation light can cause disturbance on the pacemaker’s function.
24 Operating instruments
User's manual Planmeca Sovereign Classic 165