Planmeca Sovereign Classic, User Manual

Page: 154 / 298

Factory presets for Morita TORX micromotor
Setting Preset 1 - 3 Preset a1 Preset a2 Preset a3 Preset t1 - t3
Rpm limit Enabled/
Disabled
Value range:
100 - 36 000
rpm
Default:
Disabled
Enabled
Value range:
100 - 1000 rpm
Default: 400
rpm
Enabled
Value range:
100 - 1000 rpm
Default: 400
rpm
Enabled
Value range:
100 - 1000 rpm
Default: 1000
rpm
Enabled
Value range:
100 - 2000 rpm
Default: 2000
rpm
Torque limit Disabled Enabled/
Disabled;
autoforward
Value range:
0.5 - 5.0 Ncm
Default:
Enabled, 1.0
Ncm
Enabled/
Disabled;
autoforward
Value range:
0.5 - 5.0 Ncm
Default:
Enabled, 2.0
Ncm
Enabled/
Disabled;
autoforward
Value range:
0.5 - 5.0 Ncm
Default:
Disabled
Enabled;
autoforward
Value range:
0.5 - 2.5 Ncm
Default:
Enabled, 2.5
Ncm
Handpiece 1:1 10:1 10:1 10:1 1:1
Apical
measurement
N/A Available Available Available N/A
Apical actions N/A Off/ Stop/
AutoForward
Default:
AutoForward
Off/ Stop/
AutoForward
Default:
AutoForward
Off/ Stop/
AutoForward
Default: None
N/A
Apical beep
volume
N/A On/off
Default: On On/off
Default: On On/off
Default: On N/A
The presets can be programmed, see section Modifying and saving
micromotor presets.
Presets a1 - a3
When you select one of the apical presets a1 - a3, a small
Apex locator
window automatically opens on the control panel. For information on using
the apex locator, see section Apex locator.
When you use presets a1 - a3, the
Apex locator window also features an
Apical action button. When an apex measurement is not going on, toggle the
button to define what happens when the file tip reaches the point in the root
canal defined by the flash bar. The button always shows the current apical
action (thus, the symbol on the button changes according to the selected
apical action).
NOTE
Also reaching the torque limit can make the micromotor to rotate counter-
clockwise.
24 Operating instruments
144 Planmeca Sovereign Classic User's manual