Planmeca Sovereign Classic, User Manual

Page: 174 / 298

Press Instrument spray once to switch on water 1. A green indicator light
shows that water 1 is switched on.
When sterile water is used, this switches on sterile water 1.
Press Instrument spray a second time to switch on water 2. A yellow
indicator light shows that water 2 is switched on.
When sterile water is used, this switches on sterile water 2.
Press Instrument spray a third time to switch off the instrument spray. The
indicator light goes out.
When sterile water is used, this switches the sterile water off.
Foot control:
The spray setting can be programmed to be selected with the foot control.
The indicator lights on the control panel are lit accordingly. For programming
instructions, see section "Foot control functions" on page 200.
Push the knob or pedal once to switch on water 1 (or sterile water 1).
Push the knob or pedal a second time to switch on water 2 (or sterile water
2).
Push the knob or pedal a third time to switch off the instrument spray.
NOTE
The spray must be switched off when using an instrument without a
waterline inside the handpiece.
NOTE
The instrument spray operated with the foot control can be disabled in the
service mode, in which case you can switch the spray on and off only from
the control panel. Contact your Planmeca dealer.
24.5.3 Satelec Newtron scaler
The Satelec Newtron scaler and the Satelec Newtron LED scaler have four
modes:
•
periodontics; power range 1 - 3
• endodontics; power range 3 - 5
• scaling; power range 5 - 8
• conservative dentistry; power range 8 - 10.
A coloured band at the base of the scaler tip helps you choose the proper
scaler mode on the dental unit:
•
Green - periodontics
• Yellow - endodontics
• Blue - scaling
• Orange - conservative dentistry (restoration)
When the scaler is the active instrument, the scaler mode can be changed
by pressing Power.
24 Operating instruments
164 Planmeca Sovereign Classic User's manual