Planmeca Sovereign Classic, User Manual

Page: 217 / 298

28 Maintenance
28.1 Filling water container
CAUTION
The water container must be filled with water only.
NOTE
If your dental unit uses domestic water for the instruments and dental unit
waterlines, the water container is filled automatically.
If your dental unit has been configured to use bottle water for the
instruments and the cup fill line, you must fill the water container manually.
The water level must be between the minimum and maximum markings on
the container. When the water level is low, help message HE4064 is
displayed and the container icon at the top of the control panel flashes. Fill
the container as soon as possible.
The container volume is 1.1 litres.
Fill the water container as follows:
1. Open the cap of the water container.
2. Fill the container with clean water up to the maximum marking.
3. Close the cap of the water container.
28.2 Filling disinfectant containers
Two different disinfectants are used for the dental unit’s flushing and
cleaning programs:
•
Planmeca PlanClear for instrument flushing and dental unit waterline
cleaning
• Planmeca approved suction disinfectant for suction tube cleaning.
The disinfectant containers are filled manually according to the instructions
in sections "Filling PlanClear container" on page 207 and "Filling suction
disinfectant container" on page 208.
For more information on the flushing and cleaning programs, see section
"Flushing and cleaning programs" on page 209.
28.2.1 Filling PlanClear container
CAUTION
The PlanClear container must be filled with Planmeca PlanClear disinfectant
only.
CAUTION
Wear protective gloves and glasses when you fill the container.
NOTE
If help message HE4011 is displayed during a cleaning cycle, you can still
perform the cleaning before filling the PlanClear container.
28 Maintenance
User's manual Planmeca Sovereign Classic 207