Planmeca Sovereign Classic, User Manual

Page: 207 / 298

3. Adjust the duration for how long the pump is on.
The value range is 0 - 480 minutes and the adjustment step is 1. If the
value is 0, it means that the pump is on continuously.
4. Press OK.
The pop-up window closes.
26.13 Bottle water -mode
About this task
In the bottle water -mode, bottle water is manually fed to the water container.
For filling instructions, see section "Filling water container" on page 207.
To be able to use the bottle water -mode, you must enable the use of bottle
water.
1. Toggle the Bottle water button to enable/disable the bottle water -mode.
When the indicator light on the button is lit, the bottle water -mode is
enabled.
When the bottle water -mode is enabled, the water container icon is
displayed on the control panel.
Alternatively, you can enable/disable the bottle water -mode as follows:
Steps
1. Press Program.
2. Press Maintenance.
26 Programming
User's manual Planmeca Sovereign Classic 197