PLANET Mesh Network Manager Guide
Enable the option
The configuration of the VPN is done.
4.2.3.29 Configure Mesh APs
Two methods are available to configure the Mesh AP unit remotely via the NMS,: thru Web-
based Configuration Page or launch the AP Configurator. In order to invoke any of these two
methods, right click on any of the active Mesh AP unit on the topology map (gateway or relay).
A popup menu would appear, as shown:
Select the
AP Configurator
or
Web-Based Config
option. The following figure shows the
screenshot of the Web-based Configuration page.
PLANET Mesh Network Manager Guide
Page56 of 124