![background image](http://html1.mh-extra.com/html/planet/map-3100/map-3100_software-manual_1563422021.webp)
PLANET Mesh Network Manager Guide
Note
Please make sure your Layer 2 Mesh Nodes are pre-configured for this MnM
installed PC. Otherwise, MnM can not display your Mesh nodes in the map also
cannot show the correct information at the mean time. Please also refer to Web
guide section 3.5.10 for more.
4.2.3.2
Open Map
In stead of create a brand new topology map, user can re-open the map profile that has been
saved previously. Click the
Open Map
button, or select
File > Open
Map from menu bar, a
file chooser window would appear on the screen, to prompt user to choose a map. Select the
desired one, and hit the
Open
button. The profile will be loaded to the NMS with all its
settings.
4.2.3.3
Save Map
As mentioned previously, the settings of the map profile can be saved to be loaded in the
future. Details of the map, for instance, the coordinate and SNMP passwords of the Mesh AP
units on the map, background image and block list, will be saved as a setting file.
In order to save a profile, select the
Save Map
button or
File > Save Map
from the map
container toolbar of that particular map profile you wish to save. Note that if user is trying to
save a map profile that has a same name as one of the existing profile, a warning message
would appear to get confirmation from the user to overwrite the file. To proceed with the action,
click the
OK
button.
PLANET Mesh Network Manager Guide
Page21 of 124