manualshive.com logo in svg

Pitney Bowes dm300m series, Operator'S Manual

Share
Download
Pitney Bowes dm300m series Operator'S Manual Download Page 73

6-5

SDC2036A

6 • System Options

Setting the Timeouts

You set the amount of time your system can remain inactive before 

reverting to the normal preset values and before reverting to Sleep 

Mode. Also, on the DM400M/DM475M only, you can set the Wait for 

Envelope Time.

Setting the Normal Preset Timer

The normal preset is a set of values (postage, Graphic Ad, account 

and so on) that your machine display automatically returns to after a 

set period of time. You can set the amount of time the display takes 

before it reverts to the normal preset.
1.  Press 

Options

.

2.  Select “Setup”.
3.  Select "Time and Timeouts".
4.  Select "Normal Preset Timeout"
5.  Key in the amount of minutes (from 1-240) before the system 

returns to the normal preset.

6.  Select "OK". The display returns to Time and Timeouts menu.
7.  Press 

Home

 to return to the home screen.

Setting Sleep Mode Activation Time

You can set the amount of time the machine waits until entering 

"sleep mode". When the machine is in sleep mode, the display 

is blank and you can't process mail. You awaken the machine by 

pressing any button on the control panel.
1.  Press 

Options

.

2.  Select "Setup".
3.  Select "Time and Timeouts".
4.  Select "Sleep Mode Timeout"
5.  Key in the amount of minutes (from 1-240) before the system 

goes into sleep mode.

6.  Select "OK". The display returns to Time and Timeouts menu.
7.  Press 

Home

 to return to the home screen.

Summary of Contents for dm300m series

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands