manualshive.com logo in svg

Pitney Bowes dm300m series, Operator'S Manual

Share
Download
Pitney Bowes dm300m series Operator'S Manual Download Page 42

3-12 

 SDC2036A

3 • Running Mail

Printing Mail

NOTE:

  To apply postage to large items of mail and parcels that can't  

 

be run through the machine, use tape as described  

 

 

on page 3-14. 

Select the postage required, account (if accounting is on), Envelope 

Messaging and batch function as described on pages 3-4 to 3-11.

Manually Feeding Envelopes (DM300M)

1.  If using the moistener, place the 

envelope flap under the moistener 

stripper and move the envelope 

towards the right.

2.  Position the envelope 

against the registration wall 

of the system and slide it 

to the right until the system 

grasps it. The system prints 

the digital meter stamp and 

ejects the envelope.

Mr. John Smith

1925 Main Street

Your Town, US  12345

Sue Jones

Rte 223

Her Town, 54321

Moistener Stripper

Registration Wall

Summary of Contents for dm300m series

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands