Pitney Bowes dm300m series Operator'S Manual Download Page 112

Page: 112 / 176

10-2

SDC2036A

10 • Reports

Overview of Reports

Your system allows you to print reports for funds usage, postage

refills, postage tracked by account, and other valuable data. The

reports are accessed by pressing

Options

and selecting "Reports".

NOTE:

The accounting reports described in this chapter are

available if the Departmental Accounting feature is turned on. If

INVIEW accounting is in use, refer to

Chapter 12 - INVIEW / Budget

Manager Accounting

for details of the accounting reports available.

Last 5 Refills Report

This report lists the last 5 postage refills.
1. Press

Options

2.  Select "Reports".
3.  Select "Last 5 Refills" report.
4.  When prompted, insert tape sheet or envelope into machine. The

report is printed.

NOTE:

If it is a multi-page report, you will be prompted to insert

another envelope/tape sheet.

5. Select "Yes" to return to the Reports Menu, or press "No" to

return to the Home screen.

Funds Report

This report lists the postage used, postage available, pieces

processed, and other information about your machine usage.
1. Press

Options

2.  Select "Reports".
3.  Select "Funds Report".
4.  When prompted, insert envelope into machine or Press Tape.

The report is printed.

NOTE:

If it is a multi-page report, you will be prompted to insert

another envelope/tape sheet.

5. Select "Yes" to return to the Reports Menu, or press "No" to

return to the

Home

screen.

Summary of Contents for dm300m series

















































































































































































Search results

Summary of Contents for dm300m series

Reviews:

Brands by name

Popular brands

Pitney Bowes dm300m series, Operator'S Manual

Search results

Summary of Contents for dm300m series

Reviews:

Brands by name

Popular brands