Pitney Bowes dm300m series Operator'S Manual Download Page 109

Page: 109 / 176

9-3

SDC2036A

9 • Supplies and Options

Supplies

Your

DM300M/DM400M Series

requires certain supplies to function

properly. These include:

• Ink Cartridges

• Tape Sheets

• Sealing Solution (to seal envelope flaps after processing)

How to Order

All supplies, accessories and options are available from your

machine supplier.
Contact details are given on a separate document supplied with your

DM300M/DM400M/DM475M Series, on

the rear page of this guide

and/or on a 'sticker' applied to the machine.

IMPORTANT INFORMATION

Pitney Bowes recommends that you only use genuine

replacement ink cartridges that are available from Pitney Bowes.
If alternative cartridges or refills are obtained,

the ink used must

be approved by your Postal Authority.

Summary of Contents for dm300m series

















































































































































































Search results

Summary of Contents for dm300m series

Reviews:

Brands by name

Popular brands

Pitney Bowes dm300m series, Operator'S Manual

Search results

Summary of Contents for dm300m series

Reviews:

Brands by name

Popular brands