83
Right-click the track, select [Analysis Lock] > [On].
In the Analysis mode,
icon is shown on the status column (far left column of the
track).
Using beat grids (Quantize)
When setting cues and loops on the player panel, the cue and loop points can easily be set on
beat.
1
Click the [QUANTIZE] button on the player panel
The [QUANTIZE] button lights up on the player panel.
2
Set cue or loop points
Playing on CDJ/XDJ/DJM with the quantize function
You can use m
usic files’ beat grids that were detected and adjusted using rekordbox and
enjoy quantize function when you perform using cues, loops on particular DJ equipment
(e.g. CDJ-2000NXS2, CDJ-2000NXS, CDJ-2000, CDJ-900NXS, CDJ-900, XDJ-1000, XDJ-
RX, XDJ-AERO, XDJ-R1).
If DJ player(s) (e.g. CDJ-2000NXS2, CDJ-2000NXS, CDJ-2000, CDJ-900NXS, CDJ-900,
XDJ-1000) and a DJ mixer (e.g. DJM-2000 NXS, DJM-2000, DJM-900NXS2, DJM-900 NXS)
are connected by LAN cable, you can use beat grids with quantize function when playing
FXs.
For instructions on using the quantize function on DJ equipment, see the Operating
Instructions for each DJ equipment.
4.5.4
Detecting the key
Right-click (For Mac, Ctrl + click) the music file, then select [Detect Key].
The waveform data of the music file is analyzed. The detected key can be checked on the
[Collection], [Information] window, etc.
The key can be detected simultaneously when adding music files to collections. Open
[Preferences] > [Analysis] and tick [Enable Key Analysis on import].
