118
Sample Rate
Sets the sampling frequency of audio data sent to an audio device.
Higher sampling rate allows you to achieve a playback quality
closer to that of the original track. However, as the amount of audio
data increases, the load on the audio device also increases.
Buffer size
Sets the number of samples sent to an audio device for each data
transmission.
A large buffer size reduces audio skipping (audio interruption).
However, as the transmission delay (latency) increases, the time
gap also increases between the playback position of the music file
displayed on the screen and the actual audio output.
Output channels
Sets audio output channel when there are multiple outputs from an
audio device.
Preferences: Analysis
Track
Analysis
Track Analysis Mode
Sets the mode for analyzing the music file’s waveform
information.
Normal: Suitable for analysis of tracks which have a
relatively consistent tempo
BPM Range: Sets BPM range obtained by normal
analysis
Dynamic: Suitable for analysis of tracks which contain
significant tempo changes
Sets Memory Cue at
the first beat when
analyzing
Tick the checkbox if you wish.
“PIONEER” Folder
(analysis files)
Sets where to store the wave information of the analyzed
music files.
Key
Analysis
Enable Key Analysis
on import
Tick the checkbox if you wish to detect keys when adding
music files to Collection.
Write the value to the
ID3 tag
Detected key is stored in ID3 tag.
