182
- When you select beat-based FX and non-beat-based FX and turn them on at the same time,
both of the beat and parameter values are displayed.
Use BEAT FX in single-mode
One effect can be selected per effect unit. Up to 3 parameter knobs and up to 2 parameter
buttons are available.
1
Select deck to assign an effect
See
5.7.2
2
Click the FX drop-down menu
.
3
Select an effect.
4
Click the [FX] button
.
[FX ON] lights up and the selected FX turns on.
5
Turn the [LEVEL/DEPTH] knob
.
It adjusts the balance between the original sound and the sound with effect. For example, use
the knob to coordinate how much echo is mixed to the original track.
Only the original sound comes out when the knob is turned fully counterclockwise.
Only the sound with effect comes out when the knob is turned fully clockwise.
6
Turn the parameter knob
and
.
They adjust level of the effects.
Parameter differs depending on each effect.
7
Click the parameter button
and
.
The [Parameter] buttons light up enabling to change the level of the effect.
Parameter differs depending on each effect.
