148
IN point button
Specifies the beginning of the section you wish to apply FX. A marker is shown on the enlarged waveform.
OUT point button
Specifies the end of the section you wish to apply FX.
Clear button
Clears the specified section. The Clear button is enabled when the playback position is in the specified
section.
ON/OFF button
Turns on and off ACTIVE CENSOR. When it is turned off, FX will not be applied when the playback
position is in the specified section.
CALL button
Jumps to the beginning of the specified section (IN point).
BEAT button
Changes beat parameter when [TRANS] or [V.BRAKE] is selected.
This is disabled when [REV ROLL] or [ECHO] is selected.
Adjust mode
When the playback position is in the specified section, the [IN] and [OUT] is displayed as [IN
ADJ] and [OUT ADJ] respectively, meaning you can change the position of the IN point and the
OUT point.