210
Extract one of the 8 divided slicer sections
1
Click the [SLICER]. (See 5.10 Slicer for how to use the slicer function.)
2
The Deck turns in the slicer mode.
3
Click
to the right of the enlarged waveform.
The color of the slicing range changes and the range to extract is set.
4
Drag the number part of the sliced section right below the waveform and drop
it to a sampler slot.
5
The audio source is extracted and loaded to the sampler slot and ready to be
used as a sampler.
The extracted audio source is stored at [Collection] and [Sampler] > [Capture].
When [Do not load the loaded slot] is ticked at [Preferences] > [Controller] > [Sampler],
you cannot drag and drop the sliced section to a slot if it is already loaded.
