Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 11 / 70

Page 9
For HELP, call 800.304.9684
E l e c t r i c a l S p e c i f i c a t i o n s
Important – Qualified and licensed electricians must perform all
electrical hookups. The following specifications must be followed in order
to ensure proper performance and safety.
WARNING: Starting an incorrectly wired hot tub could cause severe damage
to the mechanical equipment or even bodily harm. Have your
licensed electrician verify GFCI (or RCD) wiring with the
schematics on pages 10-20 prior to starting the hot tub or call
the technical support line at 800.304.9684.
Caution: Failure to abide by specifications listed may result in damage to the
equipment and will void the warranty.
All hot tubs must be wired with a 50 or 60 Amp breaker (or according to IEE wire
regulations for export models). Failure to do so will cause equipment damage
and will not be covered under your warranty. All hot tubs must be over current
protected with a built-in GFCI (or RCD for export models) in the service panel.
Model
Volts
(V)
Freq.
(Hz)
Rating
(A)
GFCI
(A)
Wire size from GFCI
to Main Panel
*†
Equipment
Pack
LX 4000,
LX/DX 5000
240 60 40 50
6-3 plus ground (up to 130’)
4-3 plus ground (up to 230’)
2-3 plus ground (up to 360’)
VS515Z
LX 8000,
LX 9000,
LX 11000
240 60 48 60 “ VS510SZ
PN 631 240 60 40 50 “ IN.XE
PN 741, 743,
850, 855
240 60 48 60 “ IN.XE
Table 2 – Domestic Wire Size Chart
Model
Volts
(V)
Rating
(A)
RCD
(A)
Wire size from RCD
to Main Panel
‡§
Equipment
Pack
LX 4000 -
LX 11000
220-
240
1x32
2x16 IEE Wire
Regulation
3x4 mm
2
5x1.5 mm
2
GS510SZ
PN 631, 741,
743, 850, 855
“ “ “ “ IN.XE-CE
Table 3 – Export (Overseas) Wire Size Chart
*
Wire size may need to be reduced at GFCI to fit into the breaker
†
Solid copper
‡
Wire size may need to be reduced at GFCI to fit into the breaker
§
Solid copper